Electronic Engineering Tools - Solve Design Develop and Test as an Electronic Expert

From EjWiki

Jump to: navigation, search

Five Ways To Avoid Test And Measurement Equipment Burnout

Electronics Enclosure Systems - High Frequency, High Voltage Advanced Winding Analyzers And Surge Testers Market Segment Forecasts up to 2023, Research Reports

pop over to this site for Fusion Splicers, OTDRs, Cable Testers, Certifiers, CATV Meters, Site Master, Scopemeters, Models-Ericsson, Fitel, Fujikura, Sumitomo, Nettest, EXFO, Agilent, Fluke Networks, Noyes, Microtest, Anritsu, JSDU, Corning, Siecor and for a wonderful selection of Test Equipment assets and parts.


It becomes a task for every user to clean their electronic equipment. It should be taken seriously in order to better maintain the integrity of your equipment. Actually, the dirty electronic can possibly lead to the early errors and also a shortened lifespan of the unit. However, with few pointers and ideas, you will find that it is very simple to clean electronic equipment. Just take a look at the following tips that will guide you in cleaning electronic equipment.

As the first step, you need to unplug any power cords or cable from the electronic equipment before you are working on them. Besides, you also need to remove any component cables that leading to the other devices.

The second step is to wipe it down by using a soft damp cloth that can be started from the top of the device and then working downwards. You should wipe away any accumulated lint, dust, or dander.

The third step that you need to do is to remove any fingerprints from EXFO FTB-100 FTB-7300B OTDR CDs or DVDs by using small amount of isopropyl alcohol on the soft cloth. You can do it by working from the center of the media to the outwards. It is important for you to not rub in a circular motion and you do not need to rub too hard.

For the fourth step, you need to clean the screen of your computer monitor or LCD television by gently wiping a damp cloth across the screen after all power is certainly disconnected. After that, you need to wipe down the ventilation area for removing any dust. Also, do not forget to clean the base by using the same cloth.

The fifth step, if you are going to clean your MP3 player, you can rub it down using a soft cloth with small amount of ammonia-free glass cleaner. If you find difficulty to clean the hard to reach areas which trap debris, you can use cotton swab for getting into crevices.

If you cherished this report and you would like to obtain a lot more info with regards to EXFO FTB-100 FTB-7300B kindly go to our web site.

Personal tools